What are the most important aspects which the people should know about the electromechanical cyclic triaxial system testing systems?
The cyclic triaxial system is considered to be a very highly advanced combination of hydraulic and pneumatic technology where everything will be perfectly aligned to be dynamic testing systems. It will be based upon the closed-loop principle and the processing will be perfectly undertaken without any kind of problem. In this way, the machine will always be kept working with the limit of + -1% of the program signal and the backpressure as well as confining pressure will also be perfectly controlled in the whole process. The salient features of indulging in the right kind of cyclic triaxial system have been perfectly explained as follows:
It will be based upon server controlled hydraulic closed-loop feedback mechanism
Everything will be confirmed to the stringent requirements as per the international norms of ASTM 3999 and ASTM 5311
It will help in making sure that fully computer-controlled operations will be perfectly undertaken and self-pressure, as well as back pressure, will be easily undertaken without any kind of issue.
It will be based upon user-friendly software so that people never face any hassle throughout the process.
It is also based upon strain-controlled cyclic along with 128 data sets per second.
There will be a dynamic loading range of +/-50 N to +/ - 9KN depending upon the request of the clients.
It will be very much suitable for the loading into stress and strain-based conditions so that conducting of testing can be perfectly undertaken without any kind of problem.
It will also be based upon the facility of studying the liquefaction of the behaviour of the soil so that people can make the right decisions in the whole process.
This particular concept is very much suitable in terms of accommodating the sample size of 200 mm diameter into 200 mm height of the cell pressure of 1000 KPA standardised systems.
Following are some of the very basic points which everybody should know about the electromechanical triaxial system:
It will be very much capable of meeting the essential requirements of the STM-311/3999
This particular model is very much similar to the HS 28.610 but comes except electromechanical actuator in place of the hydraulic actuator for dynamic loading systems.
With the utilisation of this particular system, everything will be much more compact and less noisy because the hydraulic powerpack will never be required in the entire process.
It comes with the best possible maximum frequency up to 5 Hz with the aptitude of 4 mm and dynamic loading of plus -50 N-plus -10KN
The main components of this particular system will include the loading frame with an electromechanical actuator
It will be based upon a triaxial cell with accessories
This particular concept is based upon an automatic pressure system with compressor and airing systems without any kind of problem
It can also be perfectly controlled with the help of a PC control system along with application software in the whole process.
Hence, the electromechanical cyclic triaxial system procedure is very easy to be understood by the concerned people and the best part is the accuracy and efficiency element associated with it which makes it very much popular among organisations.
Comments
Post a Comment