The development of
civilisation is not only based upon construction activities related to the dam,
tunnel and several other kinds of areas but it includes several other kinds of
things as well. So, to undertake every activity very accurately it is very
important for the organisation to indulge in rock testing and rock testing will
involve the determination of strength as well as elastic properties with the
help of rock testing machines.
Following are some of the
very basic types of rock testing equipment for construction and
are explained as follows:
1.
Sample preparation: This type of machine can be used in cutting out
different sizes of concrete, stones and several other kinds of building
materials. This is claimed and is pushed towards the rotating and the depth of
cut is also adjusted by pressing out the blade and the blade can be claimed in
any of the positions. It is also available in automatic models and comes with a
cutting as well as polishing machine as well.
2.
Drilling machines: This machine is very compact as well as mobile and
helps in making sure that can be utilised for different kinds of surfaces. The
drive is through a powerful two-speed motor and can easily cut out the course
up to 100 mm diameter. The total assembly will move on filler to adjust the tip
height of the bit and filler is fixed on base with two wheels for site
shifting. The machine is supplied without bits and barrels and this is a point
to be noted by the people.
3.
Testing equipment: This is utilised to carry out the point load tester
and is primarily used for the classification of raw material. It is capable of
meeting the essential requirements of the whole process and is very light in
terms of weight. The frame can even take regular specimens of the maximum
dimensions and is available in different kinds of models like tubular type and
bench type. Another model is available which is based on a digital point load
tester system and comes with better sensitivity in the whole process so that
maximum capacity can be easily reached out.
4. High-pressure controllers: These kinds of controllers are specifically
designed with the motive of confining the pressure at different values with the
help of deadbeats irrespective of any kind of deformation that could take place
throughout the testing process. Series of relays are provided in the whole
process along with a small functional horsepower geared motor that eliminates
the static friction with the help of proper rotation. It is also based upon a
digital high-pressure controller and comes in two different models depending
upon the pressure range required.
Hence, the rock testing
device or equipment can be bifurcated into different kinds
of categories as mentioned above. So, the individuals can purchase the right
kind of equipment from the house of the best manufacturers depending upon the
overall needs so that overall purposes are very efficiently fulfilled.
Comments
Post a Comment